The Fatboy tank has a number of brass tap outlets which are moulded into the tank during manufacture for maximum strength. To use any of the outlets, drill out the plastic at the back of the outlet with a paddle drill bit or holesaw and screw in the tap or pump fitting required.

Waterwall Fatboy has a 1" outlet in the alcoves at either end of the tank, and a 3/4" outlet at knee height on the front of the tank. The 1" outlets can also be used to link tanks together, with the Waterwall Joiner Kit.

When using the higher outlet on the front of the tank, water will only come out of the tank to the level of the tap, so you will need an additional outlet in the lower points to access the remaining water.

Taps are not supplied with the tank, however your distributor will be able to provide you with the appropriate fittings for your needs. The tap outlets are all standard plumbing fittings and can also be sourced from a plumbing or hardware supplier.