Fatboy 650g detailshttp://www.waterwalltanks.com/fatboy-650g-details/en-US2012-02-10T18:23:03ZSquarespace Site Server v5.11.81 (http://www.squarespace.com/)12" inlet strainerhttp://www.waterwalltanks.com/fatboy-650g-details/12-inlet-strainer.htmlWaterwall2008-12-12T03:10:38Z
The Fatboy tank is supplied with an 12" screened inlet strainer [and the screws to install it]. There are three positions on the top of the tank to install the strainer, with an indicator ring in each position to guide you.]]>Tap outletshttp://www.waterwalltanks.com/fatboy-650g-details/tap-outlets.htmlWaterwall2008-11-24T05:33:47Z
The Fatboy tank has a number of brass tap outlets which are moulded into the tank during manufacture for maximum strength. To use any of the outlets, drill out the plastic at the back of the outlet with a paddle drill bit or holesaw and screw in the tap or pump fitting required.]]>Overflowhttp://www.waterwalltanks.com/fatboy-650g-details/overflow.htmlWaterwall2008-11-24T05:28:51Z
A 3" PVC overflow outlet is supplied with the Fatboy tank, complete with a rubber gasket to ensure a waterproof fit. The overflow can be installed in either end of the tank.]]>;)
The Fatboy tank is supplied with an 12" screened inlet strainer [and the screws to install it]. There are three positions on the top of the tank to install the strainer, with an indicator ring in each position to guide you.]]>;)
The Fatboy tank has a number of brass tap outlets which are moulded into the tank during manufacture for maximum strength. To use any of the outlets, drill out the plastic at the back of the outlet with a paddle drill bit or holesaw and screw in the tap or pump fitting required.]]>;)
A 3" PVC overflow outlet is supplied with the Fatboy tank, complete with a rubber gasket to ensure a waterproof fit. The overflow can be installed in either end of the tank.]]>